Design And Function; Complete Overview; Rating Plate - Caso E7 Mode D'emploi

• The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fire that is involved with this.
• Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.
• The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.

14 Design and Function

This chapter provides you with important safety notices on the design and function of the
device.
14.1

Complete overview

1. Lid
2. Egg tray
3. Heating pan with
non-sticky coating
4. On/Offswitch with
indicator light
5. Hardness control
slide
6. Cord winder for
storage
7. Measuring cup with
egg piercer at the bottom
14.2

Rating plate

The rating plate with the connection and performance data can be founded beneath the
device.
caso Eierkocher 26