Setup - Greenlee H6510A Manuel D'instructions

Setup

Do not exceed the following hydraulic power source
maximums:
• Hydraulic flow: 45.4 l/min (12 gpm)
• Pressure relief: 138 bar (2000 psi)
• Back pressure: 13.8 bar (200 psi)
Failure to observe this warning could result in severe
injury or death.
Do not reverse hydraulic flow. Operation with hydrau-
lic flow reversed can cause tool malfunction. Connect
the supply (pressure) hose and return (tank) hose to
the proper tool ports.
Failure to observe this warning could result in severe
injury or death.
Greenlee Tools, Inc.
1. Stop the hydraulic power source.
Note: Set the Super Spool™ according to the
instructions under Setting the Super Spool™.
2. Install an accessory according to the instructions
under Installing and Removing Accessories.
3. Connect the tool to the power source according to
the instructions under Hose Connections.
8
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Impact Wrench