Festool SYSROCK BR 10 Notice D'utilisation page 18

English
the connection as soon as the
Bluetooth ® device is back in range.
No other Bluetooth
coupled with SysRock over the peri­
od of the interruption.
– If <SysRock> appears in the device
list of the Bluetooth
connection is not possible: Delete
the device from the list and connect
the Bluetooth
®
again, as described above.
– The effective range between
SysRock and the Bluetooth
is approximately 10 metres (30 feet).
Any obstacle between SysRock and
the Bluetooth ®
the range.
– The Bluetooth ®
formance can vary depending on the
connected Bluetooth
Please note the Bluetooth
tions of the device to be coupled be­
fore connecting it to SysRock. Not
all functions may be supported on
some coupled Bluetooth
Playing back audio files in Bluetooth
mode
When SysRock is successfully coupled
with the selected Bluetooth
music can be played back with the oper­
ating functions of the coupled
Bluetooth ® device.
► As soon as playback starts, set the
desired volume via the volume regu­
lation [a], [k] on SysRock or on the
Bluetooth ® device.
► Select Playback/Pause and Change
Track on the operating elements of
the coupled Bluetooth
with the buttons on SysRock: Play­
back/Pause [b], Next Track [h],
Previous Track [i].
18
® device can be
® device but
device with SysRock
® device
device can reduce
connectivity per­
® device.
® func­
® devices.
® device, the
® device. Or
Information about the track currently
being played back (e.g. track name/
artist) is shown as continuous text at
the bottom of the display.
NOTE:
– Not all applications and devices re­
spond to these control elements.
– Some mobile phones temporarily
disconnect from SysRock in the
event of incoming or outgoing calls.
Some mobile phones switch to mute
if memos, e-mails or the like are re­
ceived. Such behaviour is a function
of the coupled Bluetooth
and does not mean a fault in
SysRock.
Playing back from already coupled
devices
This SysRock can save up to eight
paired devices. When the memory ex­
ceeds this number, the earliest device
is overwritten. If the Bluetooth
was already coupled with SysRock,
SysRock saves this Bluetooth
and tries to couple with the device that
®
was last connected. If the most recently
paired Bluetooth
ble, SysRock will try to connect to the
next most recent device and so on.
Deleting the memory of the coupled
Bluetooth devices
®
► To delete the Bluetooth
memory in SysRock: Press and hold
memory key 4 [g] (<1s) until <BT-
RESET> is shown on the display.
SysRock switches off automatically
after the memory has been deleted.
® device
device
®
® device
device is not availa­
®
® device