Publicité
Les langues disponibles
Les langues disponibles
A
CONTROL PANEL. Displays the power level, time and program.
B
NUMBER BUTTONS. Used to set the heating/cooking time and select
program(s).
C
START BUTTON. Press once to start the heating/cooking cycle.
D
POWER LEVEL BUTTON. Used to select the power level. The power
level is indicated in the digital display.
Press Power Level Button
1 Time
2 Times
3 Times
E
X2 BUTTON. Used to recall or save a cooking program to a number
key.
F
PROGRAM BUTTON. Used to set a heating/cooking program.
G
STOP/RESET BUTTON. Used to stop or reset a heating/cooking
session. Pressing this button once during heating/cooking will stop the
session, pressing this button twice will end the session.
To begin a heating/cooking session manually programming the time
and power level:
1. Place the food product in oven and close the door.
2. Press the Power Level Button and select a power level. Press the
Number Button(s) to set cooking time; maximum 99 minutes and 99
seconds.
3. Press the Start Button to start.
To begin a heating/cooking session using preset power level and time
programs:
Each of the number keys is factory preset with a heating/cooking program.
1. In ready mode, press one of the ten number buttons for a preset
program, power level and time:
Number Button
Preset Time
1
2
3
4
5
1:00
6
1:30
7
2:00
8
2:30
9
3:00
0
3:30
2. Press the Start Button to start.
Power Level
High
Medium
Defrost
Preset Power Level
:10
High
:20
High
:30
High
:45
High
High
High
High
High
High
High
To begin a heating/cooking session using preset X2 power level and
time programs:
1. In ready mode, press X2 and then one of the ten number buttons to
recall the X2 preset cooking program. The following are the default
settings for the X2 number key programs:
Number Button
Preset Time
1
2
3
4
5
6
7
8
9
0
2. Press the Start Button to start.
Creating and Recalling Programs
You can save frequently used cooking programs to a number key and recall
at a later time. While each number key is factory preset, the user is able to
reset the cooking program stored under each of the ten number keys. Each
program may contain up to three stages of consecutive cooking periods
with different power levels. To designate a number key to a user defined
program, take the following steps:
Example: To set a cooking program and save it to number button 1.
1. In ready mode, press Program Button once.
2. Press the number "1" Number Button.
3. Use Power Level Button to set the desired cooking power.
4. Use Number Buttons to set desired cooking time.
5. Press Program Button to save.
You can set a two or three stage cooking program by repeating steps 3 and 4
once or twice again before pressing Program Button, step 5. When complete,
the screen will display the total cooking time by pressing Start Button.
NOTE:
To start program immediately after you press any of the number keys,
press and hold down the Start Button for 5 seconds.
Recall Cycles of Operation
You can read the count of how many times the oven has been used. To do
this:
1. Open the door.
2. Press and hold the Stop/Reset Button and press the Power Level Button.
The number on the display shows how many times the oven has been
used.
This function can be useful for the operator to analyze the usage of the oven
and the traffic flow at a particular location where the oven is being used
commercially.
Control Panel Lock
In ready mode, press and hold the Program Button for 5 seconds. The panel
is locked and intermittent pressing of the buttons will have no effect.
To release the panel lock:
In ready mode, press and hold Program for 5 seconds, the oven returns to
normal operation.
Preset Power Level
:20
High
:40
High
1:00
High
1:30
High
2:00
High
3:00
High
4:00
High
5:00
High
6:00
High
7:00
High
O
'
M
peratOr
s
anual
5
Publicité
