iRobot HVA-N1 Mode D'emploi page 10

Cleaning the Cyclone Separator
1
Press the bin empty button to access
the cyclone separator.
EN
2
Turn the cyclone separator to unlock and
remove it from the dust bin.
3
Use cold water
when cleaning the
cyclone separator.
Insert the cyclone
separator back into
the vacuum after it
is completely dry.
7 For more information, visit global.irobot.com
Cleaning the Exhaust Filter
1
Remove the exhaust filter by pressing
down on the buttons on both ends
and pulling out.
2
Wash the filter under cold water.
3
Reinsert the filter back into the vacuum
once it is completely dry.