Anthem LTX-500 Manuel D'instructions page 37

Input Signal > Aspect (Computer)
17 Aspect (Computer)
Confi gures the screen size of the projected image.
Auto
1:1
Full
●
This setting can also be confi gured from the remote control. (
●
This setting cannot be set in the case of SD or HD signals.
Input Signal > V-Stretch (when HD or SD video signals are input)
V-Stretch
18
When set to "On", the projected 2.35:1 image will be stretched vertically to the panel resolution.
On
Off
●
This setting cannot be set in the case of PC signals.
"Off"
Input Signal > Over Scan
Over Scan
19
Selects whether or not to set over scan for the SD video signal.
On
Off
●
This setting is not available when HD signal or PC signal is input.
Input Signal > Mask
Mask
20
Masks (Hides) the outer area of the projected image.
2.5%
5%
Off
●
Masking is available only when high defi nition images are input.
Input Signal > Film Mode
21 Film Mode
Selects this to view movies shot on fi lm.
Auto
Off
●
This setting is not available when a progressive signal is input.
Enlarges the PC signal horizontally/vertically until it fi ts the panel height, and displays
it in the original aspect ratio.
Displays the PC signal corresponding to the panel at one dot per pixel ratio. The PC
screen can be shown in the original size.
Enlarges the PC signal horizontally/vertically.
The projected 2.35:1 image will be stretched vertically to the panel resolution.
Projects the 2.35:1 image as-is. (Black bands will be displayed on the top and bottom.)
Over scan the top, left, bottom and right at 2.5% each.
Do not over scan.
Mask 2.5% of the screen.
Mask 5% of the screen.
No masking.
For normal circumstances, select this setting.
Select this when you are not watching movies shot on fi lm.
P16)
"On"
ENGLISH
37