Remington i-LIGHT Essential Manuel D'utilisation page 15

ENGLISH
, The treated areas become red after treatment.
• This is normal and the redness should subside. If not, try using a lower energy level.
, BE AWARE: If the unit is used over an extended period of time, the unit might automatically disable
momentarily (estimated 40 seconds) to cool down. Once the unit has cooled down, it will be ready to
use again.
All currently selected energy level
indicators flashing
All energy level indicators
flashing
LED's
All LED's flashing with warning
beep
Unit is overheated and is disabled
momentarily to cool down.
Unit is malfunctioning. Turn the
unit off, wait a few moments and
try again. If problem persists, the
unit should be returned for repair.
Treatment head is removed or
loose.
15