Safety precautions
Do not allow children to
play with the tool.
Children are not allowed
to clean or carry out
maintenance work on the
tool without supervision.
Do not overload
your tools.
Your work results and
safety will be enhanced
if you operate the tool
within the specified out-
put range.
Do not carry the tool by
the power cord. Do not
unplug the tool by pulling
on the power cord. Pro-
tect the power cord from
heat, oil and sharp edges.
Beware of
toxic gases and
fire hazards.
Toxic gases may develop
when working on plas-
tics, paints, varnishes or
similar materials. Beware
of fire and ignition haz-
ards. For your own safe-
ty, only use accessories
and attachments that are
specified in the operat-
ing instructions or rec-
ommended or specified
by the tool manufactur-
er. Using attachments or
accessories other than
those recommended in
the operating instructions
or catalogue may result
in personal injury.
Repairs by a
qualified
electrician only
This electric power tool
complies with the rele-
vant safety regulations.
Repairs should only be
performed by a qualified
electrician. Otherwise the
user may run the risk of
accidents.
- 14 -
Safety precautions
Keep these safety pre-
cautions with the tool.
Proper use
This electric power tool is intended for
shaping and welding plastic, stripping
paint as well as for heating heat-shrink-
able tubing. It is also suitable for soldering
Hot air tool specifications
n Fully electronic temperature and airflow
control
n Airflow and temperature continuously
variable
n Intelligent motor and temperature
control
n Temperature display showing selected
and actual temperature
System components
1 Delivery nozzle Ø 50 mm
2 Heating element
3 Knock guard
4 LED segment display
and tin-plating, undoing bonded joints
and for thawing frozen water pipes.
n Easy-to-change heating element
n Brushless motor for long service life
n Sturdy single-piece enclosure
n Power cord can be changed without
opening enclosure
5 Temperature regulator
6 ON/OFF switch
7 Airflow regulator
- 15 -