Télécharger Imprimer la page

STEINEL PROFESSIONAL HG 5000 E Traduction Du Mode D'emploi Original page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
GB Translation of the original
operating instructions
Safety precautions
Read and observe this
information before
using the tool. Failure
to observe the operat-
ing instructions may
result in the tool be-
coming a source of
danger.
When using electric pow-
er tools, observe the fol-
lowing basic safety pre-
cautions to avoid elec-
tric shock as well as the
risk of injury and fire. If
the tool is not used care-
fully, it may cause a fire
or injure persons. Check
the tool for any dam-
age (mains connection
lead, housing etc.) before
putting it into operation
and do not use the tool if
it is damaged.
Do not leave the tool
switched on unattended.
Children should be super-
vised to make sure they
do not play with the tool.
First time of use
A small quantity of
smoke may develop
when the tool is used for
the first time. This smoke
is caused by binding
agents released from
the heater's insulating
film during the first time
of use. To let the smoke
escape quickly, the tool
should be set down on
its standing surface. The
area you are working in
should be well ventilated
when using the tool for
the first time. Any smoke
coming out of the tool is
not harmful!
- 12 -
Safety precautions
Take the ambient
conditions into
account.
Do not expose electric
power tools to rain. Do not
use electric power tools
when they are damp or in
a damp or wet environ-
ment. Exercise care when
using the tool in the prox-
imity of flammable materi-
als. Do not direct the tool
at one and the same place
for a prolonged period. Do
not use in the presence of
an explosive atmosphere.
Heat may be conducted
to flammable materials that
are hidden from direct sight.
Protect yourself
from electric
shock.
Avoid coming into con-
tact with grounded
objects, such as pipes,
radiators, cookers or
refrigerators. Do not
leave the tool unattended
while in operation.
Store your tools
in a safe place.
After use, set the tool
down on its standing sur-
face and let it cool before
putting it away. When not
in use, tools must be
stored in a dry, locked
room out of children's
reach.
This tool may be used by
children aged 8 or above
and by persons with
reduced physical, senso-
ry or mental capabilities
or lack of experience and
knowledge if they are
supervised or have been
given instructions on how
to use the tool safely and
understand the hazards
involved.
- 13 -

Publicité

loading