Ricatech RR700 Mode D'emploi page 5

BASIC OPERATIONS
1. Turn the VOLUME/POWER switch knob clockwise to turn the power on.
2. Open the CD DOOR on the top of unit to insert a disc onto the DISC TRAY then close the CD
DOOR. *(Make sure the CD DOOR is closed properly.)
3. Rotate the mode selector to CD.
4. Adjust listening level with volume knob.
5. Press S.F. (SKIP FORWARD) to skip ahead to next track.
6. Press S.B. (SKIP BACKWARD) to skip back to previous track.
7. Press PLAY/PAUSE button to play disc, press twice to temporarily stop disc play at the current play
position, Press the button again to resume disc play from the pause mode.
8. Press STOP button to stop playing disc.
NOTES
If the disc is seriously scratched, too dirty, disc play may not start.
If an improperly centered disc is played, noise can be heard in the mechanism. The use of
such discs should be avoided.
Do not tilt the unit with discs loaded. Doing so may cause malfunctions.
REPEAT DISC PLAY
1. Press REP button once to repeat disc play of one track.
2. Press REP button twice to repeat disc play all the tracks.
3. Pressing once more turns off repeat mode.
PROGRAMMED DISC PLAY
1. Press the STOP button.
2. Press the PGM button.
3. Select a track number then press PGM button again.
4. Repeat step 3 until all the desired tracks are programmed.
5. Press PLAY/PAUSE button to play disc.
TO LISTEN TO THE RADIO
1. Set the MODE selector to FM or AM
2. Adjust the sound with the VOLUME/POWER knob.
3. Tune to the desired radio station by using the TUNING knob.
4. To turn off the radio, rotate the VOLUME/POWER switch knob counter-clockwise until you hear a
click sound.
LIGHT OPERATION
1. Rotate the LIGHT knob clockwise to switch on all lights.
2. To switch off lights, rotate the LIGHT knob counter-clockwise.
LIGHT MODE - LOCATED AT THE BACK COVER (IF EQUIPPED)
The colors of the lights change over time on both side of light pillar, switch to HOLD position to
remain static to your favorite color.
NOTE: The changing color sequences of lights are controlled by IC. It is normal
that the lights may turn off when the light mode is in HOLD position.
Switch to PLAY position to resume
ENGLISH - 4