Télécharger Imprimer la page

Ricatech RR700 Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS
Read Instructions – All the safety and operating instructions should be read before the product is operated.
1.
Retain Instructions – The safety and operating instructions should be retained for future reference.
2.
Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
3.
Follow Instructions – All operating and user instructions should be followed.
4.
Cleaning – Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
5.
Use a damp cloth for cleaning.
Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.
6.
Water and Moisture – Do not use the product near water – for example, near a bath tub, wash bowl, kitchen sink, or
7.
laundry tub; in wet basement; or near a swimming pool; and the like.
Accessories – Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall,
8.
causing serious injury to a child or adult and serious damage to the product.
bracket or table recommended by the manufacturer or sold with the product.
follow the manufacturer‟s instructions, and should use a mounting accessory recommended by the manufacturer.
9.
A product and cart combination should be moved with care; quick stops, excessive force and uneven surface may
cause the product and cart combination to overturn.
10. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the
product and to protect it from overheating. These openings must not be blocked or covered.
never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer‟s
instructions have been adhered to.
11. Power Sources – This product should be operated only from the
type of power source indicated on the marking label.
sure of the type of power supply to your home, consult your product
dealer or local power company.
from battery power, or other sources, refer to the operating
instructions.
12. Grounding or Polarization – This product may be equipped with a
polarized alternating-current line plug (a plug having one blade
wider than the other).
one way.
This is a safety feature; if you are unable to insert the
plug fully into the outlet, try reversing the plug.
still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug. (FOR USA
OR CANADA ONLY)
13. Power-Cord Protection – Power-supply cord should be routed so
that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to
cord at plugs, convenience receptacles and the point where they exit from the product.
14. Protective Attachment Plug – The product is equipped with an attachment plug having overload protection.
safety feature.
See Instruction Manual for replacement or resetting or protective device. If replacement of the plug is
required, be sure the service technician has used a replacement plug specified by the manufacturer that has the
same overload protection as the original plug.
15. Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Article S10 of National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the
grounding electrode. See Figure 131.1.
16. Lightning – For added protection for this product during a lightning storm or when it is left unattended and unused for
a long period of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
17. Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might
be fatal.
18. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in
a risk of fire or electric shock.
19. Object and liquid Entry – Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on
the product.
20. Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
21. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d)
If the product does not operate normally by following the operating instructions, adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the product to its normal
operation.
e) If the product has been dropped or damaged in any way, and
When the product exhibits a distinct change in performance – this indicates a need for service.
f)
22. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
23. Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
24. Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recommended by the
manufacturer.
25. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
For products intended to operate
This plug will fit into the power outlet only
ENGLISH - 2
If you are not
If the plug should
Use only with a cart, stand, tripod,
Any mounting of the product should
The openings should
This product should not be
This is a

Publicité

loading