Style selections 23RM2094 Mode D'emploi page 8

1. Turn the master power switch off, then unplug
the power cord from the wall outlet.
If fireplace has been operating, let the unit cool
at least 2 hours.
Locate and rotate the 2 nuts on the glass holder in
counterclockwise direction to loosen the glass from
insert. (Fig. 1).
2. Carefully tilt glass and frame forward a couple of
inches. Then pull complete glass assembly up and
away from unit (Fig. 2).
3. Locate the two ember bed securing nuts on the left
and right sides of the log set. These securing nuts
are disguised as wooden embers (Fig. 3).
4. Turn nuts counterclockwise to loosen; remove
and set aside. Securely grab logs on left and
right side and lift log/ember bed assembly
straight up. Once ember bed has cleared the
support bracket and threaded rods, bring
log/ember bed assembly forward and out of unit
and set aside in a safe place (Fig. 4).
1
2
2
3
Wooden Ember Nuts
4
Wooden
Ember Nut
Logs/Ember bed
Ember bed Mounting Post
8
2 Nuts
2