POLTI Vaporetto Leader Mode D'emploi page 42

ENGLISH
To regulate the steam temperature and cleaning power hold the gun nea-
rer to or further from the surfaces as required. By adding one or more exten-
sion tubes you can also use the outlet of the extension tube as a steam gun
to avoid over-reaching.
Use the steam gun in any application; eg to get into hard-to-reach corners
and crannies in living rooms or bathrooms, in the kitchen (eg cooker or frid-
ge), car interiors, for softening of stains in fabrics, etc.
GENERAL
Apply the steam jet with great care especially on sensi-
tive surfaces to avoid damage by the hot steam. Never
hold your hand close to the steam, the steam is even
effective in places which cannot be reached by normal
cleaning methods. Even old deposits are released and
removed. If you find strong smells given off by the dirt
released, ventilate the room well whilst working.
LARGE BRUSH
Use this brush to clean all large surfaces. Stretch the cotton cloth lightly over
the bristles using the clips provided on the brush head. Switch on the steam
at the handgrip, and move the cloth-covered brush gently over the surfaces
to be cleaned (including rugs and carpets).
To clean hard surfaces you need only place the brush head inside a cloth
without clipping on, if you wish. To clean heavily soiled surfaces, apply the
brush with steam on first without a cloth to release the dirt, then proceed as
above.
With the large brush you can also clean large tiles, wall surfaces or other wall
coverings, or preprepare badly soiled large glass surfaces.
SMALL BRUSH
Use this brush for surfaces similar to those mentioned for the large brush, but
where the area to be covered is smaller. Always cover the brush head with
at least one small cotton cloth (or our special sockettes). Dirty cloths can be
washed in a washing machine or dishwasher, (however do not add softener).
CLEANING WITH BRUSHES
On sensitive surfaces (eg plastic or synthetics, varni-
shed surfaces) always use at least one cotton cover (to
avoid marking).