Télécharger Imprimer la page

sunjoe SWD8000 Manuel De L'opérateur page 11

Publicité

Les langues disponibles

Les langues disponibles

m
WARNING!
The HEPA filter must be installed before dry
vacuuming again.
Cleaning the Foam Filter
m
WARNING!
The foam filter must be cleaned every time
after wet vacuuming.
1. Switch off and unplug the unit.
2. Remove the power head from the collection tank.
3. With the removed power head in the upside down
position, carefully remove the foam filter from the filter
cage (Fig. 12).
Fig. 12
4. Use a mild soap and water solution to wash the foam filter
and rinse with clean water. Allow the wet filter to air dry for
24 hours before installing onto the filter cage.
5. To assemble the filter, fit the foam filter on the filter cage
(Fig. 13).
Fig. 13
Foam filter
Storage
1. Examine the electric wet/dry vacuum thoroughly for worn,
loose or damaged parts. Should you need to repair or
replace a part, contact an authorized Snow Joe
Sun Joe
dealer or call the Snow Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
2. Examine the appliance cord thoroughly for signs of
3. Store the wet/dry vacuum indoors in a clean, dry and
4. When not in use, the equipped tubes, handles and nozzles
Foam filter
Service and Support
If your Sun Joe
service or maintenance, please call the Snow Joe
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Model and Serial Numbers
When contacting the company, reordering parts or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
+
®
+ Sun Joe
®
®
11
excess wear or damage. If it is worn or damaged,
replace it immediately.
locked location out of the reach of children and animals.
can be temporarily stored in the onboard vacuum hose
+ power cord storage and onboard accessories storage
(Fig. 14).
Fig. 14
Onboard
accessories
storage
SWD8000 electric wet/dry vacuum requires
®
Record the following numbers from the housing or handle of your
new product:
Model #:
S W D 8 0 0 0
Serial #:
Onboard vacuum hose +
power cord storage
+ Sun Joe
®
®

Publicité

loading