Publicité
Les langues disponibles
Les langues disponibles
Anleitung_Kettensaegebock_Norma_SPK7:_
1. Safety regulations
Be sure to wear safety gloves and all other
essential safety equipment when working on the
sawing trestle! It is also imperative to follow the
safety instructions issued with the chain saws!
Take care that you do not injure yourself on
sharp corners or edges.
Place the sawing trestle on a level, non-slip
surface.
Do not overload the chain sawing trestle (max.
150 kg, Ø 250-300 mm).
The wood you want to saw must always rest
securely on the chain sawing trestle.
The wood you want to saw is allowed to project
beyond the chain sawing trestle only to the point
where tipping is impossible.
Each time before use, check that all screws are
securely and correctly fastened.
2. Layout
A. 2 x foot A
B. 2 x foot B
C. 2 x foot C
D. 2 x cross strut D
E. 2 x cross strut E
F. 3 x M8x14 screw + 3 x M8 self-locking nut
G. 2 x M6x28 screw + 2 x M6 nut
H. 8 x M6x12 screw + 8 x M6 nut
I.
3 x M6x12 screw + 3 x M6 washer + 3x M6 nut
J. Safety catch
3. Assembly
See the illustrations. The nuts G and H must be
tightly secured. The self-locking screws F and I must
be secured to the point where the chain sawing
trestle can still be adjusted/folded.
4. Operation
Important: Use the chain sawing trestle only on level
ground. The safety catch has to be securely latched
before use. The chain sawing trestle can be used in
3 different height settings. The height is set with the
safety catch (J) which must always be latched at the
same height on both sides.
After work is completed, the chain sawing trestle can
be folded down for storage in minimum space. When
folding down, keep your fingers and other body
29.01.2009
13:42 Uhr
Seite 5
parts .
5. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info away from the hinges.
6. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
GB
5
Publicité
