Line In Operation - auna 10031947 Mode D'emploi

Playing Audio via BT
1 After successfully pairing with a device, use the controls on the
connected BT device to select a track.
2 To play or pause the selected track, use the controls on the connected
BT device or the PLAY/PAUSE button on the unit.
3 To skip forward or back from the selected track, use the controls on
the connected BT device or the SKIP/TUNE (up) button or SKIP/TUNE
(down) button on the unit.
4 Audio played through the connected BT device will now be heard
through the unit's speakers.

LINE IN OPERATION

LINE IN jack allows you to connect an external music player or external
sound source to the main unit.
1 Plug a 3.5 mm audio cable (not included) into your external music player
and connect the other end (3.5 mm plug) into the LINE IN jack on the
front of the unit.
2 Make sure your external music player is turned on.
3 Press the SOURCE button on the unit to switch to LINE IN mode.
4 Start music playback on your external music player.
5 Adjust the Volume + / Volume – button to set the desired volume.
EN
21