Publicité
Les langues disponibles
Les langues disponibles
NET-SWITCH™ QRG
Product
Description
AC Power
AC Plug
Connection
Overview
The NET-SWITCH provides a seamless network connection that is designed to
distribute/extend your network at speeds up to 1000Mbps, ensuring Art-Net®,
Kling-Net, sACN, and other applications function well in a live environment.
The NET-SWITCH is a plug-and-play device. These ports can be used as general
ports or Uplink ports, and any port can be simply plugged into a server, a lighting
console, a hub, a router, a switch or a PC. Diagnostic and power LEDs are located
on the front of the product. These allow you to determine power state, link status,
and activity allowing you to quickly detect and correct problems on the network.
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
The NET-SWITCH uses Amphenol XLRnet (etherCON®/RJ45 compatible) data
connections to send and receive information that expands the connections of a
current network. Simply plug a data cable from the lighting/video controller(s) into
one of the throughput connections and plug your other lighting/video devices into
the other 7 ports. The data indicator LED's on the front panel will illuminate and
blink indicating link status and activity.
If using Kling-Net devices with this product, set your Kling-Net controller to a
static IP address.
Power In
Power Indicator
Wire (U.S.)
Wire (Europe)
Black
White
Green/Yellow
Data throughput
Data indicator LED's
3
Screw Color
Brown
Yellow/Brass
Blue
Green/Yellow
EN
Silver
Green
Publicité
