Bigben STG-ONE Manuel De L'utilisateur page 4

4. HID mode for PC and some Android games)
03. Switch the controller on by pressing the 'Home' button.
LED INDICATOR
IMPORTANT : Please note that by default this controller is set for the french territory.
Please make sure that you set the controller to the correct setting for your country.
For UK, AUS & US (QWERTY) press buttons 4 and HOME together for 5 seconds for the fi rst
power on.
For Germany (QWERTZ) press buttons 1 and HOME together for 5 seconds for the fi rst power
on.
To set back to France (AZERTY) press buttons 2 and HOME together for 5 seconds.
The Power LED and indicator LEDs will light up to show you what mode you are in.
- IOS \ icade mode = Power LED + LED1 & 2
- Android mode = Power LED +LED 1
- Keyboard mode = Power LED + LED 2
- HID mode = Power LED only
04. Press and hold the Home button and then press the start button.
05. The Power LED will then fl ash to indicate that it is in search mode.
06. Check your Bluetooth settings on your device and select the Bigben STG-ONE from the list.
07. The controller will now connect to your device.
Note: For Android mode, you must fi rst download the driver app and install it. For full details visit
www.bigben.eu/support and select the STG-ONE from the product list. You can then select
the driver and the full instruction manual for step by step instructions. Please follow the
sequence correctly.
Keyboard mode (3) and HID mode (4) can also be used on Android devices without the Android driver, but
compatibility depends on the game. When attempting to pair your device with the Gamephone, you may need to
select the 'Search for Devices' option to fi nd the STG-ONE fi rst.
For HID mode on Windows PC, follow the installation instructions from the online manual mentioned above.
The online manual also includes a comprehensive troubleshooting guide, in case you experience any set up
problems. Also, check our website for extensive list of compatible games on IOS and Android.
INSERTING YOUR TABLET
The STG-ONE has been designed to hold 7»-10» tablets.
Your tablet must measure between 130 and 280mm. Check your tablet for size before using it with your
STG-ONE.
Follow these instructions to insert your tablet:
- Turn your STG-ONE over and move the safety lock to the «RELEASE» position.
1. Pull the handles apart to insert the tablet;
2. Make sure there is no extra room between the handles and the tablet.
03