GeoMax ZEL400HV Mode D'emploi page 18

Accessories
Detector Mode
6 Slots for bracket
7 Capture window
8 Magnet
9 Bubble vial
10
11
12
LCD Display
13 Lower the detector
14 Raise the detector
15 Level
• A detector is recommended when it's difficult to see the laser beam
(outdoors, bright light).
• Before using the ZDR300 detector mode, it is very important to set laser
on "laser point" mode (turning the top cover). The receiver cannot detect
the beam in chalk line mode.
Remote Control Mode
Decrease rotation speed
Increase rotation speed
16 Sound On/Off
17 Battery level
18 Coarse/Fine mode
ZEL400HV | 16
Scanning Mode
Aim scan left
Aim scan right
Scan On/Off