Publicité
Les langues disponibles
Les langues disponibles
EX 5000
Note: The appliance is not equipped with jug, please use yourself jug or coffee cup.
5. Plug the coffee maker to mains, press ON/OFF push-button, the heating indicator lamp (red) will light.
6. When the coffee maker has warmed, ready indicator (white) will light, ensure heating button is not
pushed "
", turn function knob to "
7. When the cup is full, turn function knob to "
water of cup and clean it well. Now you can start to make coffee.
PRE-HEATING
To make a cup of good hot espresso coffee, we recommend you preheating the appliance before
making coffee, including the funnel, filter and cup, so that the coffee flavour cannot be influenced
by cold parts.
1. Remove the detachable tank and open the tank cover to fill it with desired water, the water level should
not exceed the "MAX" mark in the tank. Then place the tank into the appliance properly.
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the appliance,
to set the metal funnel in coffee maker the handle should be to the left, push up until it fits and turn to
right.
3. Place the cup on warmer cup tray, to get warm.
4. Plug the coffee maker to mains. Ensure function knob is on "
5. Push ON/OFF push-button, heating indicator (red) will light, ensure heating button is on higher position
"
".
6. When ready indicator (white) lights, coffee maker will be ready to brew coffee.
MAKE AN ESPRESSO COFFEE
1. Remove metal funnel turning to left. Add coffee powder to steel mesh with spoon, one spoonful of
coffee powder is enough to make a cup of coffee. Well press the coffee in steel mesh with plane part of
spoon.
2. Place the metal funnel in the coffee maker, the handle should be to the left side, push upward until it fits
and turn to right.
3. Place the cup on drip place below metal funnel.
4. When the ready indicator (white) lights, turn function knob to "
will brew.
Note: when you use the coffee maker many times in a row, ready indicator (white) will turn off sometime; it
means the temperature of boiler falls a little, wait for it warms again, to use it.
5. When you get the desired quantity of coffee (30 ml for espresso and 60 ml for double espresso) turn the
function knob to "
WARNING: do not let the coffee maker unattended while you are making coffee, because it is manual, the
cup of coffee could overflow if you don't stop it on time.
6. At the end of making coffee, turn the metal funnel to left taking it by handle, remove it from the coffee
maker and empty the coffee powder of steel mesh. Use the press bar (in metal funnel handle) to avoid
the filter falls when you are emptying the coffee powder.
7. Push the ON/OFF push-button to turn off the coffee maker.
8. Let it cooldown.
" position, water brews throw the metal funnel.
" position for stopping it.
" position to stop coffee maker, then you can pour out
" position.
" position, after few seconds the coffee
13
Publicité
