Programming Your Disc - Oakcastle CD-10 Mode D'emploi

PROGRAMMING YOUR DISC

EN
Follow the steps below to program your CD to play tracks in a specific order other
than the default order. To do this, it may help to refer to the album cover or track
list. You can program up to a maximum of 20 tracks.
Ensure the CD is stopped. Press PROG to enter program mode (Ref.6).
Using the 'Previous' and 'Next' buttons (Ref.8)/(Ref.18)/(Ref.9)/(Ref.19), select the
first song you would like the disc to play. The display will show P01, P02, etc. on
the right hand side, to refer to each consecutive track slot - Programmed track 1,
Programmed track 2, and so on.
Press PROG again (Ref.6) to confirm. Repeat the above steps until you have
programmed each track slot.
Press Play (Ref.4)/(Ref.17) to begin playing the selected track order.
Note: when playback stops, the programmed playback will be erased. To cancel
programmed playback, press the play button.
9