auna Roadie 2K Mode D'emploi page 35

B. AC operation
Plug the detachable AC cord A into a standard AC outlet (230V~50Hz).
1. When the AC power cord (included) is connected to the AC Power Socket
on the back of the unit and the other end is plugged into a 230V AC~
50Hz wall outlet, the unit will disconnect the batteries automatically, and
operate on AC Power only.
2. Press POWER button to turn on the power of the unit.
Note: This unit is equipped with an automatic standby function. With this
function, the unit enters standby mode automatically after about 15 minutes
if there is no operation or audio signal output.
Volume control
Turn the VOLUME control control to change the volume.
EN
35