Freeman PFS16 Mode D'emploi page 4

MODEL: PFS16
Such precautionary measures reduce the risk
of injury to persons.


LOADING TOOL
● Do not load the tool with fasteners when
any one of the operating controls is
activated.
●
Never place a hand or any part of body in
fastener discharge area of tool.
● Never point the tool at anyone.
● Do not pull the trigger or depress the
workpiece contact as accidental
actuation may occur, possibly causing
injury.
! WARNING:
The warnings and precautions
discussed above cannot cover all
possible conditions and situations that
may occur. It must be understood by
the user that common sense and
caution are factors which cannot be
built into this product, but must be
supplied by the user.
UNPACKING
●
This tool has been shipped completely
assembled.
●
Carefully remove the tool and any
accessories from the box.
●
Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.
●
Do not discard the packing material until
you have carefully inspected and
satisfactorily operated the tool.
●
If any parts are damaged or missing,
please call 1-888-669-5672.
! WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result
in possible serious personal injury.
!
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such
alteration or modification is misuse
and could result in hazardous
condition leading to possible serious
personal injury.
06
HTTP://WWW.FREEMANTOOLS.COM
FEATURES
SPECIFICATIONS
AIR CONSUMPTION: 6.35 SCFM with 100
fasteners per minute @ 90 psi
AIR INLET: 1/4 inch NPT
MAGAZINE CAPACITY:
100 fasteners, 16 gauge
WEIGHT: 4.34 lbs
MAXIMUM PRESSURE: 100 psi
PRESSURE RANGE: 60 psi – 100 psi
FASTENER LENGTH RANGE:
3/4 inch to 1 inch
3/4" 18mm
7/8" 22mm
1"
25mm
(16 Ga.)
Compatible with generic brands of 16 gauge
fencing staples.
FEATURES
360°ADJUSTABLE EXHAUST
Allows user to direct air away from face.
ONE PIECE DRIVER BLADE
For increased durability.
ANODIZED ALUMINUM CYLINDER AND
MAGAZINE
For long lasting durability.
COMFORT-GRIP HANDLE
For increased comfort and control.
ERGONOMICALLY ENGINEERED BODY
Rugged and Comfortable resulting in a
light-weight tool great for extended use.
ADJUSTABLE DEPTH
Depth is easily adjustable for various
applications.
QUICK-JAM RELEASE
Allows for easy access clearing in the
event of a jam.
1-888-669-5672
MODEL: PFS16
OPERATION
ADJUSTING THE EXHAUST
The adjustable exhaust on the cap of the tool
allows users to direct the exhaust according
to operator preference. To adjust the direction,
turn the exhaust cap in the desired direction.
LOADING FASTENERS
1. Connect the tool to the air supply.
2. Pull the Pusher backward until the Pusher
Pin set into the Stop Hole.
3. Insert appropriate nail strips from the top
of magazine.
4. Pull the Pusher Handle to get the Pusher
Pin released from the Stop Hole to let the
Pusher go back to move fasteners up to
the driving mechanism. The Pusher will
stop when it rests against the end of the
fastener.
Stop Hole
Pusher handle
Pull backwards
Pusher Pusher Pin
PULL
Staples
(16Ga.)
Stop Hole
Pusher
Handle
HTTP://WWW.FREEMANTOOLS.COM
! WARNING:
The tool may fire when it is first
connected to the air source. Always
connect the tool to the air source
before loading fasteners to prevent
injury from unintended cycling. Always
make sure the tool's magazine is empty
at the beginning of each work session,
before connecting to an air source.
! WARNING:
Only use those fasteners recommended
for use with this tool. Fasteners not
identified for use with this tool by the
tool manufacturer can result in a risk of
injury to persons or tool damage when
used in this tool.
!
WARNING:
Keep the tool pointed away from
yourself and others when loading
fasteners. Failure to do so could result
in possible serious personal injury.
!
WARNING:
N e v e r l o a d f a s t e n e r s w i t h t h e
workpiece contact or trigger activated.
Doing so could result in possible
serious personal injury.
UNLOADING FASTENERS
Unloading is the reverse of loading, except
always disconnect the air source before
unloading.
! WARNING:
Always unload all fasteners before
removing tool from service.
!
! WARNING:
Always disconnect the air source before
unloading.
1-888-669-5672
07