INSERT THE POWER PACK
1. Place the power pack into the pouch on the bag.
2. Thread the connectors through the opening in the pouch.
3. Fully charge the power pack. See instructions below.
CHARGE THE POWER PACK
NOTICE: The charger and heat pad should not be connected to the
power pack at the same time. Doing so may damage the
equipment and void the warranty.
NOTICE: Incorrect voltage can damage the equipment and will void
the warranty.
NOTICE: Use only the included chargers to charge the power pack.
Other chargers could damage the equipment and void the
warranty.
1. Connect the metal plug on the power pack to metal plug on the
charger. Tip: Align the arrows on each connector.
2. Plug the charger into the power source.
3. Press and hold the power button to turn on the power pack.
4. The meter will display 100% when fully charged.
5. Turn off the power pack.
www.vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Main Tel: 800.624.2051 or 920.457.4851
Main Fax: 800.752.5620 or 920.459.6573
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
HEAT THE BAG
NOTICE: The charger and heat pad should not be connected to the
power pack at the same time. Doing so may damage the
equipment and void the warranty.
1. Connect the black plug on the heat pad with the black battery plug
on the power pack.
2. Turn ON the power pack.
3. To set a new temperature, double tap the power button. The display
will flash.
4. Press and release the button to select a new temperature. The
selection will reset in approx. 3 seconds.
5. The display will show the current temperature of the heat pad.
6. Allow the pad to heat to the desired temperature.
7. Place containers of hot food into the bag. Tip: To extend the charge
of the power pack, turn it off after the food has been delivered.
Residual heat will keep the bag warm.
8. Monitor the power meter. Recharge when the power meter is
flashing. Refer to Charge the Power Pack.
CLEAN THE HEAT PAD
NOTICE: Do not use any toxic, corrosive or scratching cleaners on
the heat pad. Do not immerse the heat pad or allow it to
come into contact with excessive amounts of liquid.
1. Disconnect the heat pad from the power pack. Let it cool completely.
2. Wipe the heat pad with a damp, clean cloth.
WARRANTY STATEMENT FOR THE VOLLRATH CO.
This warranty does not apply to products purchased for personal,
family or household use, and The Vollrath Company LLC does not offer
a written warranty to purchasers for such uses.
For complete warranty information, product registration and new
product announcement, visit www.vollrath.com.
Technical Services
techservicereps@vollrathco.com
Induction Products: 800.825.6036
Countertop Warming Products: 800.354.1970
Toasters: 1-800-309-2250
All Other Products: 800.628.0832
©
2018 The Vollrath Company L.L.C.
Part No. 351779-1 ml
12/21/18