SILENTRON 5511 Mode D'emploi page 5

e) Anti arrachement dans le cas de fixation dans un angle on doit positionner l'aimant correctement avec la fixation murale.
Néanmoins, on peut placer l'aimant dans le corps de l'étrier coulissant, pour permettre l anti arrachement.
f) La compensation en température: Avec cette fonction on peut augmenter automatiquement la sensibilité, lorsque la
température RIP dépasse 30 ° C et est active dans la mise sur le dip-switch 6..
CARACTERISTIQUES TECHNIQUES (voir les dessins)
Alimentation: 4,5 V par 3 piles AA 1,5 V 2,2 Ah - 70uA la consommation au repos, 40mA en transmission - Autonomie de 2
ans, qui peut être réduite de façon significative en cas de fréquents passages dans la zone protégée et la suppression de l
affichage des leds peut accroitre l autonomie (dip-switch 4).
Fonctions: la signalisation de la zone protégée, le mouvement (d'alarme intrusion) - contrôle batteries.
Transmission Radio: 64 bits en double fréquence en contemporanéité sur les Dualband - fréquence et la puissance a norme
de loi Range de 100m environ en air libre et en l'absence de perturbations sur les bandes.
WIRELESS PASSIVE INFRARED DETECTOR
Installation: all installation, maintenance and/or modification of these control units and their devices must be carried out by qualified technical staff. These
operations can be subject to specific technical Standards which must be complied with. The device is envisioned to be used exclusively inside buildings protected
from exposure to very high and very low temperatures as well as tampering by children and/or persons without common sense for the purpose and effects of the
Civil Code.
Electrical connections: all electrical connections, without exception, must be made perfectly fixing all wires as envisioned in order to prevent accidental
disconnection and closing the containers and protection devices correctly. It is mandatory to disconnect all electric connections exceeding 25V in DC and AC before
opening the containers of functioning appliances.
External power supply: 230V CA 50 Hz - connect in compliance with country law regulations
Batteries Rechargeable accumulators and/or batteries of any type: these appliances use accumulators or batteries, which are potentially dangerous as they are
pollutant, therefore dangerous to the health of the public. Replace the accumulators and/or batteries exclusively with same models, position and connect them
respecting the polarity indicated in the instructions. It is mandatory to dispose of accumulators/waste batteries according to the Standards in force. This is also the
case when the machines must be scrapped. The accumulators/batteries must be previously removed, returning them to the appliance dealer or depositing them in
the relevant containers made available by the distribution network. If liquid should escape from the batteries or accumulators, use silicone gloves to protect the
hands and prevent injury.
Liability: the manufacturer declines all liability consequent to incorrect installation and/or failure to use the devices supplied.
Warranty: the warranty is valid until the expiry written on the label inside the device in the terms envisioned by the Vienna Convention of 1980 regarding the
International Sale of Goods.
Copyright: all rights relative to this manual are the property of Silentron s.p.a. It is prohibited to partially or totally reproduce the texts and imaged herein, as is the
introduction into W.E.B. network and/or public distribution with any means.
Standard conformity: more of CE declaration, the products are in compliance with EN 50131-1 - environmental class 2 and they are declared of category I by the
standard 300.220 - 1 (04/2006)
1. CONDITIONS FOR USE AND INSTALLATION CRITERIA:
Star Pir is a passive infrared detector (PIR = passive infra-red detector) designed to indicate a human target or similar moving in
the protected area and has been designed for indoor installation.
Brackets and supports: the swivel code 5961 is a useful accessory that allows correct positioning, particularly in a corner.
2. FUNCTIONING
a) General features: the appliance functions with 3 AA alkaline batteries and transmits the alarm via radio, therefore connection
wires are not required. The PIR part of the appliance always functions and indicates human and similar movements, visible from
the red LED on the front of the appliance.
Block for the reduction of consumption: after every alarm the appliance is momentarily blocked. This is restored after 2 minutes
with no movement in the area. This is to reduce consumption in busy areas.
b) Adjustments: the appliance allows adjustment of the RANGE and in PULSE COUNTS, which constitutes an intervention
delay.
c) Anti-removal protection: a relevant magnet, to be fixed to the wall in the point envisioned on the sliding bracket, allows anti-
removal protection. When the detector is correctly positioned on the bracket, the magnet closes a reed positioned inside the
appliance: upward or downward sliding and/or the detachment of the appliance from the wall cause a "tampering" alarm.
d) Anti-opening protection: by opening the powered appliance, a relevant button controls the transmission of tampering
independently from the condition of the anti-removal magnet.
e) Appliance test conditions (TEST): Star Pir goes into TEST by pressing the LED button. The test state lasts 3 minutes and
via LED displays all detections, annulling the block after a first alarm. Attention! The appliance remains permanently in TEST
when it is open.
5
SILENTRON – Made In Italy
COPYRIGHT SILENTRON DF5511XA090723GM