Publicité
HAWA-Folding Concepta 25
2
Product information
Intended use
Pivot/slide-in hardware for wooden pocket doors for cabinet or wall recesses.
Intended place of use
This furniture hardware is designed for protected interior rooms.
Tecnical data
Maximum door weight
Door width
Door height
Door thickness
Sets are marked left and right.
Use the straightening fitting for stabilizing sliding doors.
A Hawa-Concepta 30/40/50 set is required for 3-door systems with a width clearance of 2120 mm.
Maximum permissible deflection of the hardware assembly face and door ± 2 mm ( ").
Maximum deflection of the cabinet top 2 mm ( ").
Use a commercially available bow handle on the folding door.
Calculation aid available at hawa.ch.
Certificates are available for downloading at www.hawa.ch.
Article number
Articles are identified by a 5-digit number.
General notes
The document «Safety Notes» (22991) is an integral part of these planning and assembly instructions.
The operating instructions, the planning and assembly instructions and the document «Safety notes» (22991) must be handed over to
the end user.
Metric measurements apply - those in inches are for information only.
Retain the instructions. Replacements available from www.hawa.ch.
Risk and residual risk
The hardware does not pose a risk or residual risk.
CAUTION
Moving parts can crush fingers.
– Do not touch moving parts!
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
25 kg (55 lbs.) (50 kg [110 lbs.] per pair of doors)
300–700 mm (11 "–2'3 ")
13
---- -
16
7
1250–2600 mm (4'1 "–8'6 ")
---- -
32
3
1
19–26 mm ( "–1 ")
- -
---- -
4
32
3
---- -
32
9
---- -
16
3
- -
8
3
---- -
32
7
Publicité
