Publicité
Les langues disponibles
Les langues disponibles
.
the
Light(optional)
2
4 Changing
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer,
its service agent or similar qualified person. Replacement must first cut off the power supply.
product or statement by the distributor
.
2
5 Starting
product or statement by the distributor
2.6 Energy saving tips
The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading
the appliance forces the compressor to run longer. Foods that freeze too slowly may
lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
After transportation, please let the refrigerator stay for more than 2 hours
before turning on the power, otherwise it will lead to a decrease in cooling
capacity or a damage to the refrigerator.
Do not connect the freezer to power supply within five minutes to prevent
damages to the compressor due to successive starts.
Publicité
