Klarstein LUGANO Mode D'emploi page 8

EN
Power
switch
TPD switch
8
PRODUCT DESCRIPTION
OPERATION
1. Insert the adapter into the adapter port and plug it into the electrical outlet.
2. Open the front cover, then use your index finger and thumb to hold the watch
pillow from the two sides of the pillow hitch marked with two arrows. With some
force, pull out the watch pillow.
3. Place the watch on the pillow by pushing in the spring on the back of the pillow,
then put your watch around the pillow and let go of the spring.
4. Once the watch is on the pillow, place the pillow back into the winder.
5. Use the switches on the unit to select as below:
Note: Use Power switch to select winder rotating direction or turn off the unit. Use TPD
switch to select the TPD you wanted.
Cover
Watch pillow
Put the watch pillow
extender on the watch
Pillow extender
pillow for larger sized
(for big watches)
wrist watch.