Common Trouble Shooting - EVER BRIGHT FC2580 Mode D'emploi

Cleaning:
If any specific solution is stored in the water tank, take little time to clean the water
tank after using.
Fill some warm(not hot) water into the water tank and point jet tip to the washbasin.
Switch on the machine to run it till the water is emptied. This helps to prevent the
blocking and increase the life of the product.
When there is necessary for washing, clean the product with soft cloth and neutral
wear-free detergent.
Maintenance
1、After using the Water Flosser every time, invert the water tank, till no water or
cleaner and dried, and place it in cool and dry place with cleaned device. If the
machine is not used for a long time, it should be put into the package and store well.
2、When there is something wrong with the machine, you could consult the retailer.
3、Please do not dismantle or try to disassemble the product by yourself, and the
failure caused by this will not be included the warranty.
4、If the charge cable is broken, please repair it at the repair shop designated by the
Company or the shop with relevant repair qualification.
5、We still supply service for the Water Flosser that has exceeded the warranty
period, but material cost and little manual service fee will be charged.
13

Common trouble shooting

Error phenomena Reason
The jet tip is not installed
Leakage between the
in place
jet tip and handle
Leakage from the
Damaged pipe
water pipe
It might be no valve at
the bottom of tank, or
Water tank leakage
the valve is mounted in
an opposite way
Incorrect location for
Insufficient pressure
the installation of the
water tank
Failure to start Motor failure
The Company assures to the original consumers and owners of this new
product that the product has no defects in material and process, and the
warranty period is one year from the date of purchase.
Thank you once again for purchasing everbright Water Flosser!
Treatment method
Remove the tip and
install it in right place
Replace it through the
seller or repair it by the
customer service
Replace the valve or
mounted in the right
direction.
Mount the water tank
again with downward
pressure
Ensure whether the
power supply is
switched on; contact
with the sales repair
14