GB
Operation
1
Before first use/Charging the battery
Before using the scales for the first time and when their battery is empty, you will need to charge
the battery using the USB charger cable supplied. To do this, connect the charger cable to a
power source (e.g. computer, USB charger) via a USB port. When the display flashes, charging
is complete.
Scales not usable while charging. After 1
minute of charging, the scales can be used
for 20 minutes.
2
Switching on and using the appliance
To switch on the scales, place them on an even surface and press on the control panel. As soon
as the weight on the display reads zero, the scales are ready for use. If you want to weigh items
in a bowl or other container, you must either place the container on the scales before switching
them on or tap the control panel before weighing to reset it to zero.
www.zwilling.com
1.
Operation
While the appliance is
charging, a dash on
the display will move from
right to left.
2.
15