Evercraft 776-1488 Mode D'emploi page 4

PREVENTIVE MAINTENANCE
• Any press found to be inoperable or not operating according to its original design as a result of worn parts due to lack of lubrication or
adjustment, air/hydraulic system (if applicable) contaminated with water, rust and/or foreign materials from the air supply or other outside
source is not eligible for warranty consideration.
• The press must be anchored to a bench and placed in a well protected area where it will not be exposed to inclement weather, corrosive
vapors, abrasive dust, or any other harmful elements.
• Check for hydraulic leaks and tighten, repair or replace components before using.
• Use a general purpose grease to lubricate the pump linkage on the pump #5.
• It should not be necessary to refill or top off the pump's hydraulic fluid reservoir unless there is an external leak. An external leak requires
immediate repair by a qualified hydraulic repair mechanic who is familiar with the press.
• In order to prevent hydraulic seal damage, never use alcohol, hydraulic brake fluid or transmission oil in the hydraulic pump. Use a light
viscosity hydraulic jack or turbine oil, Chevron Hydraulic Oil ISO 32 or its equivalent Unocal Unax AW 150.
• Do not attempt to make any hydraulic repairs unless you are a qualified hydraulic repair person that is familiar with this press. Repair by an
authorized service center is recommended.
TROUBLESHOOTING
PROBLEM: RaM wiLL nOt ExtEnd.
PROBLEM: RaM wiLL nOt hOLd RatEd LOad.
PROBLEM: PuMPing fEELs sPOngy undER RatEd LOad.
PROBLEM: RaM wiLL nOt ExtEnd aLL thE way.
aCtiOn: Make sure the round vent screw on the pump's reservoir is open. Following the air purging instruction under assembly
instructions step 10.
PROBLEM: RaM wiLL nOt REtRaCt aLL thE way.
aCtiOn: Make sure the round vent screw at the top of the reservoir is open. If this does not correct the problem contact your place of
purchase for details on handling warranty.
PROBLEM: PREss stiLL dOEs nOt OPERatE PROPERLy.
aCtiOn: Contact your place of purchase for details on handling warranty.
WARRANTY
Please contact your local NAPA Auto Parts Store for details on warranty.
776-1488 4 rev. 07/15/15