PIEPS DSP PRO Manuel page 91

PIEPS DSP PRO
Auto-ReveRt SeARch-to-Send (AR)
NOTE! PIEPS wants to specifically point out, that any Auto-Revert
function Search-to-Send only provides limited protection in case of a
"secondary avalanche"! Complete protection is only guaranteed by using
the PIEPS BACKUP. Find further information on www.pieps.com.
PIEPS AR – GENERAL FUNCTION: Getting caught and buried by
an avalanche with your PIEPS DSP PRO in SEARCH mode, the device
switches from SEARCH to SEND automatically.
Characteristics of the PIEPS AR function:
• Movement- and time controlled initialization
• Short delay time
• Long warning with signal sound and countdown before switching
• Permanent warning after switching
PIEPS AR – INDICATION ON START-UP: Activated AR on your
PIEPS DSP PRO is indicated on the display with "AR" on device start-up:
PIEPS AR – FUNCTIONALITY: AR will not be initiated as long as
you´re moving with your PIEPS DS PRO. Getting buried with your PIEPS
DSP PRO (no movement determined) the AR function will be initiated
as follows:
0
Time in seconds
Verification period
AR period
Display
Sound
Transceiver
function
Manual abort Abort possible by moving
PIEPS AR – MANUAL ABORT: Being without movement in
SEARCH mode for 30 seconds your PIEPS DSP PRO starts warning with
signal sound and display countdown. During this period the AR initiali-
zation can be aborted manually by consciously moving the transceiver.
After switching into SEND mode (AR SEND) transmitting cannot be ab-
orted by movement anymore – your PIEPS DSP PRO is now permanently
transmitting and warning with signal sound until it is either turned off
(OFF) or switched to SEND manually.
30
SEARCH
Display
SEARCH
Sound
SEARCH
1 2
ON
(SEND)
Firmware version
1-30 seconds
31-60 seconds
60. second
from 61 seconds
Warn period
WARN
Abort possible by moving
SWItCHINg to SEND
PIEPS AR & DSP PRO FIRMWARE: By activating the AR
function on your PIEPS DSP PRO the firmware v1.4, which is
needed for AR, will be flashed simultaneously.
3 4
Selfcheck AR indication
Verification period. Your beacon is in
SEARCH mode
Warn period. Signal sound and display
countdown before switching
Switching to SEND
AR SEND. Your beacon is transmitting
permanently warning with signal sound
60
AR-SEND
SEND
Abort NOT possible by moving
© Pieps GmbH | 01 – 2014
5
SEND
Mode
90...