Publicité
Les langues disponibles
Les langues disponibles
CONTROL PANEL
Program
Function Instruction
1. Insert the plug, put the safety key into the control panel, open the power switch, full screen display
1 second after the beep sound to enter standby.
2. In the manual standby mode initially: SPEED display 0.0； TIME display 0:00; DIST Display 0.0;
CAL display 0;
3. In the manual standby mode, press the MODE key, you can respectively select the mode:
normal, preset time or preset distance. If choose count up timer, display "：" flash display; and
count down, display the static status.
4. In the standby mode, click the program key, its P1-P12 auto program for choice, the time will
show by count down, original time is 30：00, you can adjust the time from 5:00---99:00 by speed
+/- key.
5. In the standby mode, all of shortcut key are useless, if click the stop key, all will come back to
manual standby status.
6. When running all mode, it must be having 3 seconds count down (speed display), and
buzzer 3seconds. In this mode, the mode key and program key are invalid.
7. In manual operation mode, you can adjust the speed from 1-10km/h, you also can choose.
Lcd Display
Start
Speed
The Emergency Stop Switch
Speed Selection Area
Speed
Stop
9
Mode
Publicité
