Legamaster XTX-5500UHD Manuel De L'utilisateur page 17

6.2.3. Audio Settings
This menu is used for volume settings.
Volume
Adjust the sound.
Press ◄ or ►, select the desired level, and then press
ENTER.
Range: 0~100
Default: 20
Bass
Adjust the sound in low tones (bass).
Press ◄ or ►, select the desired level, and then press
ENTER.
Range: -10 ~ 10
Default: 0
Treble
Adjust the sound in high tones (treble).
Press ◄ or ►, select the desired level, and then press
ENTER.
Range: -10 ~ 10
Default: 0
Balance
Adjust the balance of the left and right speakers.
Press ◄ or ►, select the desired level, and then press
ENTER.
Range: -10 ~ 10
Default: 0
Speaker
Turn the internal speaker on or off
Options: On, Off
Default: On
Audio Source
Select the audio source for the Main input
Options: Default, VGA
Default: Default
OSD (ON-SCREEN DISPLAY) CONTROLS
6.2.4. Basic Settings
This menu is used for basic settings.
Horizontal Pos.
Adjust the horizontal position of the OSD menu.
Press ◄ or ► to select the desired level, and then
press ENTER.
Range: 0~100
Default: 50
Vertical Pos.
Adjust the vertical position of the OSD menu.
Press ◄ or ► to select the desired level, and then
press ENTER.
Range: 0~100
Default: 50
OSD Transparency
Adjust the transparency of the OSD menu.
Press ◄ or ► to select the desired level, and then
press ENTER.
Range: 0~4
Default: 0
OSD Timeout
Adjust the time in seconds before the OSD menu
disappears.
Press ◄ or ► to select the desired level, and then
press ENTER.
Options: 5s, 10s, 20s, 30s, 60s
Default: 30s
OSD Language
Select the OSD language
Options: English, French, Deutsch, Nederland
Default: English
Power On/Off Music
Select whether to enable the power on/off music
when the monitor is powered up.
Options: On, Off
Default: On
XTX-5500 – USER MANUAL – ENGLISH
17