Publicité
Les langues disponibles
Les langues disponibles
CAUTION
the use of the wrong nosepiece can damage the tool.
2 - Place the rivet mandrel into the nosepiece.
3 - Place the rivet body in the hole of the assembling part.
4 - Operate the trigger until the rivet mandrel breaks.
Ø 4.8
(3/16'')
Ø RIVET
Ø 6.4
(1/4'')
NOSEPIECE
SURFACE
Make sure that the mandrel container has enough space to receive the mandrel of the rivet in
setting. The mandrel container can be easily emptied :
1. Turn the mandrel container counterclockwise. You must hear a «click»
2. Remove the mandrel container and empty it in a proper container.
3. Put the mandrel container in place on the tool .
4. Turn the mandrel container clockwise. You must hear a «click»
CAUTION
A full mandrel collector can cause a jamming of the rivet mandrel inside the tool and
result in a tool malfunction.
STANDARD
STANDARD
HYPERIV
STANDARD
HEMLOK
-
STANDARD
Flat
2
MANDREL
CONTAINER
STRUCTURAL RIVET
SUPERIV
INTERLOCK
INTERLOCK
MONOBOLT
(Dome head)
(Countersunk head)
MAGNA-LOK
MAGNA-LOK
(Countersunk head)
(Dome head)
A
MARK
B
Recessed
-
-
MONOBOLT
(Dome head)
-
C
E
D
F
Protruded
ELEMENT SIX - User Manual
EN
FR
PL
CZ
IT
• 5
Publicité
