Publicité
Les langues disponibles
Les langues disponibles
6
EN
TROUBLESHOOTING
FR
The mandrel is stuck.
PL
Where
CZ
Nosepiece
IT
Jaws set
Pusher
Warning lights
flashes
7
WARRANTY CONDITIONS
During the warranty period, the customer must not perform any alterations other than those permitted by the
manufacturer (maintenance). The repairs must be done by an authorized serice center.
To admit warranty repair, the customer must return the defective tool to the service center of the manufacturer
with the proof of purchase. Warranty is valid only if the tool is in its warranty period (12 months from the date of
purchase confirmed by the proof of purchase) and if the conditions of use have been respected.
Warranty is not valid if worn spare parts have to be replaced (further to a normal use of the tool).
This product (including battery and charger) shall not be treated as household waste. It shall be handed over
the applicable collection point for the recycling of electrical and electric equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of
materials will help to conserve natural ressources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you purchased
the product.
10 •
ELEMENT SIX - User Manual
Cause
Wrong nosepiece mounted
Worn nosepiece
Mandrel blocked in jaws set
Mandrel collecter full
(>100 mandrels)
Worn pusher
Low battery charge or
damaged battery
Tool capacity exceeded
Tool overheating
8
DISPOSAL OF OLD
ELECTRICAL & ELECTRIC
EQUIPMENT
Solution
Mount a correct nosepiece according to the
NOSEPIECES table §1 p.5.
Replace by a new one
Clean/replace the jaw set by the additionnal set
provided in the pack or order a new jawset
Unmount and empty the mandrel container
Clean/replace the pusher
Charge or replace the battery
Let the tool cool down for a moment
Publicité
