Publicité
Les langues disponibles
Les langues disponibles
•
Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "AL 1" or "AL 2"
button to confirm.
•
Press the "SKIP +" or "SKIP -" button to select 1, 2, 3, or 4.
•
1 - usb
•
- sd
•
- buzz
•
- Fn
•
Press the "AL 1" or "AL 2" button to confirm.
•
The display will show "ALARM1" or "ALARM2". ALARM set complete.
•
Press the "AL 1" or "AL 2" button to activate alarm on / off function.
Notes: If alarm set wake up by "USB / SD / RADIO", do not set the volume too low to avoid
ignored. You may adjust the volume on the appliance. If alarm set wake up by "buzz", volume
control on appliance will not be affected.
SNOOZE: When the timer is triggered. You may press the "SNOOZE / DIMMER" button to delay
the alarm for another 10 minutes.
When the backlight of display is light or dim, you may press the „SNOOZE / DIMMER" button on
unit to adjust brightness. Note: DIMMER can be use in Standby or Non-Standby Mode.
According to the European waste regulation 2002/96/EG this symbol on the
product or on its packaging indicates that this product may not be treated as
household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will hep prevent potential negative consequen-
ces for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailled informa-
tion about recycling of this product, please contact your local council or your
household waste disposial service.
Manufacturer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
2014/53/EU (RED)
Dimmer
Environment Concerns
Declaration of Conformity
13
Publicité
