Ravpower RP-SH014 Mode D'emploi page 6

1
1. Press the Cradle Release Button to open up the cradle.
2. Place the smartphone with wireless charging functionality onto the
phone holder. Squeeze gently the cradle to t your device.
Note:
• Phone cases with thickness over 0.2 inch / 0.5cm will not be detected.
• Align the center of your phone on the wireless charging zone for
faster charging.
2
Adjust the tray as per your phone
size. The indicator will blink blue
indicating charging is started.
Speci cations
Model
Input (Wireless Charger)
Output (Wireless Charger)
Micro USB Cable Length
Dimensions
Weight
Caution
• Do not drop, knock, or squeeze the product.
• Do not dismantle or throw the product in re or water to avoid causing
short circuit or leakage.
• Do not use the wireless charger in severely hot, humid, or corrosive
environments to avoid circuit damage and leakage.
• Do not place close to magnetic stripe or chip card
(ID card, bank cards, etc.) to avoid magnetic failure.
• Make sure the back of your phone or phone case is even without foreign
metal objects.
• Keep at least 20cm / 7.9in away from implantable medical devices
(pacemakers, implantable cochlear, etc.) to avoid potential magnetic
interference.
• Keep away from children.
RP-SH014
5V / 9V; 18W
10W Max
120cm / 47.2in
114 x 60 x 25mm / 4.5 x 2.4 x 1in
175g / 6.18oz
04/05