Neutral VWU 32E Instructions D'installation Et D'utilisation page 15

VWU 32E - VWU 50E
ATTENTION!
Fig. 3.3:shows the position of connections (A) ; (B) on the heat exchanger
of the heat pump.
Fig. 3.3: Schematic view / heat pump connections (label affixed inside the heat pump)
Fig. 3.4: Sample view of complete hydraulic assembly (example)
ATTENTION!
Provision of a dirt trap (mesh size 0.6mm) is recommended at a suitable
location.
Screw threads are to be sealed using materials suitable for this
purpose.
ATTENTION!
All components must be installed in a dry and frost-free location.
452163.66.60 · FD 9801
English
EN-5