Publicité
Les langues disponibles
Les langues disponibles
User Manual
Troubleshoot
The Radio Frequency (RF) codes are factory preset for your Presenter and should work out of the box.
However, if for any reason the Presenter does not function correctly try these steps.
1. Ensure
a. The receiver is properly inserted into the computers USB Port.
b. Check the device is shown in your device manager as a HID – compliant device and there is no
exclamation mark shown next to it.
If there is a problem:
i. Remove and reinsert the receiver into the USB Port.
ii. Check the device driver is up to date via properties in device manger.
c. Check the Presenter Handset is turned ON.
2. Reset the Presenters RF Channel by pressing the Connect Button on the bottom of the Presenter. This
will switch the Presenter & Receiver to a different channel.
OFF
Reset
ON
English
Publicité
