Publicité
Les langues disponibles
Les langues disponibles
WARNING INFORMATION
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING
BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING PROCEDURES,
SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.
It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsiblity of
the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost
or not legible, contact NAPA for replacements. If the operator is not fluent in English, the product and safety instructions shall be read to
and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator
comprehends its contents.
THE NATURE OF HAZARDOUS SITUATIONS
WARNING
The use of attachments, adapters, and accessories with portable automotive lifting devices are subject to certain hazards that cannot be
prevented by mechanical means, but only by the exercise of intelligence, care, and common sense. It is therefore essential to have owners
and personnel involved in the use and operation of the equipment who are careful, competent, trained, and qualified in the safe operation of
the equipment and its proper use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing
loads, overloading, off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not
designed.
METHODS TO AVOID HAZARDOUS SITUATIONS
WARNING
•
Read, study, understand and follow all instructions before operating this device.
•
Inspect before each use. Do not use if damaged, altered, modified, in poor condition or has loose or missing components. Take
corrective action before using.
•
This device is not designed for overhead lifting applications. Stay out from under a load being lifted or suspended.
•
Do not exceed rated capacity.
•
Support device only. Install or remove the engine support tool only after lifting and securing the engine
•
Do not spread the load bearing chains more than a total of 90°.
•
Assure load is secured to the device.
•
Make sure tool foot contact points can support the load.
•
Position the tool on areas of the vehicle as specified by the vehicle manufacturer.
•
Use only replacement parts approved by the manufacturer.
•
Attach all four chains to the load being lifted.
•
User and bystanders must wear eye protection that meets ANSI Z87.1 and OSHA standards.
•
No alterations shall be made to this device.
•
Failure to heed these warnings may result in personal injury and/or property damage.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS
WARNING
Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS,
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS could
cause accidents resulting in serious personal injury and/or property damage.
791-6006
OPERATING MANUAL & PARTS LIST FOR 791-6006
WARNING: Indicates a hazardous situation
WARNING
which, if not avoided, could result in death
or serious injury.
2
rev. 04/27/20
Publicité
