Fanaway MONTCLAIR Instructions D'installation page 6

Fanaway Montclair Installation Instructions
ANGLED CEILING INSTALLATION
This fan hanging system supports a maximum 8 degree angled ceiling
installation.
Fig. 3
INSTALLING THE FAN
INSTALLING THE DOWN ROD (Fig. 4)
Fig. 4.1
1. Remove the ball joint (2) and dowel pin (3) by loosening the set screws (4) from the down rod (6).
Remove the hitch pin (9) by removing the lock clip (10) (Fig. 4.1). NOTE: Do not discard keep these
parts, they are required to reassemble later.
Fig. 4.2
Fig. 4.3
Fig. 4.4
5 | P a g e