Grant Vortice Guide De L'utilisateur page 5

Vortice Portable Immersion Circulator
User guide
Running a bath preset
1. Press the F button and rotate the dial until the display shows the correct preset.
2. Press the S button to select the preset.
3. Press the S button to set the bath to the preset temperature.
Setting countdown timer
1. Press the F twice - the display will show "Cloc".
2. Press the S to select.
3. The display flashes with time (in minutes). Rotate the dial to set time required (1 to 6000min).
4. Press the S to store value and start the timer. The display alternates between bath temperature and time
remaining.
5. An alarm will sound when the countdown timer reaches zero. "End" will be displayed. Press the
accept.
6. To stop the timer at any time, set to 0 minutes.
5
F or S to
EN