Publicité
Les langues disponibles
Les langues disponibles
Vortice Portable Immersion Circulator
User guide
Setting the temperature
Press S,
Display will
flash.
Configuring a preset
1.
Press the
F
button and rotate the dial until the display shows ''t1, t2 or t3''. The display will alternate between
the preset number and its temperature.
2.
Press the
S
button to select the preset.
3.
Use the dial to set the desired preset temperature. If no key is pressed for 10 seconds then the display will
revert back to showing the bath temperature and the preset temperature will remain at its original value.
4.
Press the
S
button to save the preset temperature. The preset will automatically start as soon as the value is
saved.
1.
2.
Rotate dial
to desired
temperature.
4
3.
Press
S
to store
value.
Publicité
