CONTENT
1. Components
2. Assembly
FRANÇAIS
1. COMPONENTS
1. Please empty the packing box thoroughly and make sure that all the parts are present and that there are no
missing parts.
2. DO NOT PLUG THE UNIT IN UNTIL THE UNIT IS COMPLETELY ASSEMBLED AND MAKE SURE THERE IS NO
DAMAGE to the unit and power cord.
3.
If you must use an extension cord, the cord should be at least NO .14 AWG and rated for no less than
1875 W.
4. For indoor and outdoor Use
IF THERE IS ANY DAMAGE OR MISSING PARTS, PLEASE CONTACT ENERG+ CUSTOMER SERVICE AT 866-967-
7333 ext. 227 (8:30 AM to 5:00PM Eastern time) or email us at:
2. ASSEMBLY
Parts: 1 X Allen key
6 X M6*25mm screws
1 X waterproof washer
Place the heater and its components on a non-marking and non-scratching surface.
Remove the Allen key from the package
Read this manual before installation and use. Keep this manual in a convenient place for future use if needed.
info@ebiweb.ca
P a g e
| 1