Operating Instructions; How To Replace Batteries; Led Light - Tribest TVP-1050 Mode D'emploi

OPERATING INSTRUCTIONS

Step 1: Place the Vacuum Pump on to the Vacuum Lid of the Tribest Vacuum Blenders or on the
Vacuum port of the Tribest Sousvant Resealable Bag.
Step 2: Once the Vacuum Pump is secured, press the Power Button on the Vacuum Pump to start
pumping air out of the container.
Step 3: The Vacuump Pump will automatically stop once the maximum vacuum pressure is reached.
Step 4: Enjoy blending with minimal oxidation or have your food stay fresh up to 5 times longer.
10
HOW TO REPLACE BATTERY
Life expectancy of battery and replacement:
Generally, the operating time per cycle is between 20 ~ 30 seconds. New batteries will provide
approximately 120 cycles.
Afterward, please replace all 8 batteries if working time for vacuum completion take longer than
expected. After removing the cover, please remove the holder. Replace with new batteries. (Front/
Back of holder) need to be inserted back with arranging the lines.
The LED Light status indicator:
1. Normal Operation: the LED turns on during operation of the Vacuum Pump and automatically
shuts off when the max1imum vacuum pressure is reached.
2. Low Battery: when batteries are low, the Vacuum Pump will stop pumping but the LED Light will
remain on for 60 seconds. Please replace batteries.
3. Overcurrent (* excl. It will restart when fully vacuumed): It will turn off after blinking for 25
seconds.)
EN

LED LIGHT

11