Publicité
Les langues disponibles
Les langues disponibles
1. FEATURES
- Material: ABS
- Receiver power supply: AC 100-240V - 433MHz
- 80 dB at 1 meter
- 100 meters range in free field
- Wall bracket provided
2. HOW TO USE IT
a) nstall
Metal
UPVC
Door-
Surface
Frame
Avoid locating Transmitter/Receiver on or directly near metallic surface as this may reduce
the operation range.
When locating Transmitter onto a UPVC door frame, always check the operating
performance before final installation.
Receiver
•
Plug the receiver into the outlet. The receiver will perform better if keeping it away from
electric equipment.
Chasse
Pêche
Try adjusting the location of the receiver according to the "Range Guide".
•
Transmitter
Clean the surface where you intend to mount the transmitter and the back of the
transmitter.
Before mounting the transmitter, please run a test. Put receiver and transmitter where you
want to mount. Close all doors when you test. If the receiver does not sound, please see-
Trouble Shooting.
DO NOT install transmitter on UPVC door frames.
DO NOT install transmitter on Metal surface
Mount the transmitter with screws
Place the button mounting base on the required place of the wall
screw the two screws into it. Carefully push the button down to
the stop
Or mount the transmitter with adhesive pad
Stick the transmitter to the wall by adhesive pad.
Press the transmitter for 30 seconds.
b) Start
Loisir et nature
Jardin
www.ducatillon.com
Élevage
Publicité
