How To Clean - Panasonic NC-ZK1 Mode D'emploi

How to Clean

 Clean the appliance after every use.
 Before cleaning, unplug the power plug, pour out the hot water, and cool the body.
• Do not use soap. (This may cause a residual odor.)
• Do not use benzine, thinner, alcohol, bleach, polishing powder, metal brush or nylon
brush, otherwise the surface will be damaged.
• Do not wash in a dishwasher.
Wash carefully using a brush etc.
• If the spout is blocked by scale build-
up, hot water will pour less easily.
• After cleaning, always attach it to the
body.
Wipe with a well-wrung cloth.
Max
1.4
1.0
0.6
Power base
Wipe with a well-wrung cloth.
12
Mesh Filter
Lid
Body connector
Power base
connector
How to detach
• Push the filter towards to the
spout and pull it upwards.
How to attach
• Align with the groove on the
spout and press it firmly.
(Outside)
Wipe with a well-wrung cloth.
(Inside)
Rub with a soft sponge and rinse.
Scale build-up
Minerals such as calcium carbonate contained
in the water build up in the kettle.
Please remove the scale.
1 Remove it regularly using:
• scale remover
Follow the instructions supplied with the
scale remover.
• citric acid
Fill the kettle with water half way up and
boil it. After switch is off, add approx. 80 g /
2.8 oz. (2 tbsp) of citric acid and stir it well.
Let it set for approx. 30 min.
• white vinegar
Fill the kettle with water up to Max
level and boil it. After switch is off, add
approx. 100 mL / 3.4 oz. of vinegar and
stir it well. Let it set for approx. 2 hours.
 After removal, repeat the following steps a
few times: fill with water, boil, pour away.
To store
• Dry thoroughly.
• Seal in a plastic bag to prevent insects etc.
from entering.
Body