many links as necessary using this method. Reinsert the rod in the opposite
direction of the arrow and push it back into the band. The strap and clasp
can now be reassembled.
A replacement tip for the tool is included in the bottom of the tool.
An instructional video is available for online viewing at the following URL:
http://specials.lidl.com/videos/nou9nohN/
...or simply scan the following QR code:
Band shortening for the model 2-LD4577-5
The band includes a moveable clasp for easy band shortening.
1. Push a suitable tool into the opening on the clasp and lever the clasp
open.
2. Move the clasp to the required length and let it snap into place on the
horizontal grooves on the back side of the strap.
Securely re-engage the clasp (using a tool if necessary).
- 5 -
Cleaning instructions
Clean the wristwatch with a soft, dry and lint-free cloth. A glasses cleaning
cloth is ideal.
Replacement of battery (SR626SW)
Battery replacements must be performed by an expert to avoid damaging
the case or gaskets.
Water resistance
Water resistant up to 5 bar. The bar value specifies the atmospheric
overpressure which is applied during testing (DIN 8310).
Disposal of the watch
This wristwatch may not be disposed of with normal household
waste. Dispose of the wristwatch at an approved disposal facility or at your
local recycling centre. Please observe the current rules and regulations
when disposing of the watch. Contact the disposal system if in doubt.
Disposal of the batteries
Please dispose of your batteries properly in containers especially
set up at retailers. Batteries do not belong in household waste. Dispose of
the batteries at an approved disposal facility or at your local recycling
centre. Contact the disposal system if in doubt.
- 6 -