Air Cleaning System; Operating Instructions; Operating The Air Purifier - KLARBACH LR64036we Mode D'emploi

AIR CLEANING SYSTEM

Improve your indoor air quality with your new Air Cleaning System. Multiple
levels of cleaning include a combination of Pre-filter that traps big particals,
Ture HEPA filter that captures micro particles and Activated Carbon Filter to
remove odors and bad smells as well as UV-C light technology enhances germ-
killing.
PRE -FILTER : Captures initial dust and allergen particles.
HEPA FILTER : Captures dust, smoke, pollen and other allergens. Carbon filter
helps to reduce the VOC, toxic fumes and foul odor
UV-C LIGHT : Destroys micro-organisms such as germs, viruses, bacteria and
fungi (such as mold toxins).

OPERATING INSTRUCTIONS

BEFORE OPERATING THE AIR PURIFIER:
1. Carefully remove your air purifier from box and plastic bag.
2. Select a firm, level and flat location for the air purifier.
*For proper air flow, locate the unit at least 1 foot from any wall or furniture.
*Make sure none of the grills are blocked.
3. Plug the power cord into a right voltage AC outlet.
IMPORTANT: When moving the air purifier, always lift unit firmly by your hands.

OPERATING THE AIR PURIFIER

1"POWER " BUTTON:
Press this button to turn on or switch off the unit.
Note: Press and hold POWER Button for 5 seconds to reset Filter Replace
Indicator.
15
2."SPEED " BUTTON:
The fan speed of the unit can be adjusted when the unit is in operation (L/I M/II
H/III). Each time that you press on the (SPEED) button, the speed is adjusted
from L (low) to M (medium) to H (high).
3."UV-C/SLEEP " BUTTON:
SLEEP
First press this button to turn on UV lamp.
Second press this button to turn on Sleep mode. The indicator flickers 10 times
before all indicators dim. Press any button to activate the machine, Sleep mode
off.
Third press this button to turn off the UV lamp. After sleep mode indicator
flickers 10 times, sleep mode is ON again.
Forth press this button to turn off the Sleep mode.
Note: Sleep Mode is not to be remembered in program after re-plugging the
machine.
4."TIMER " BUTTON:
1) By pressing this button, the purifier can be timed to operate for intervals of 2
hours, 4 hours and 8 hours, stopping automatically when the selected
operating time has elapsed.
2) Press this button (Timer) to select the required operating time. A warning
light automatically indicates the remaining operating time.
3) To select the continuous operating mode, press the button repeatedly until
there are no more indicator lights lit up.
Important note : When the unit is not in use, please switch it off and unplug it.
ENG
16